Closed

April 18, 2022

The Japan Synchrotron Radiation Research Institute (JASRI) is pleased to announce that SACLA Feasibility Study Program has started since 2021A to provide an opportunity to experience the use on a trial basis for the purpose of dissemination and enlightenment at SACLA. Please refer to the following guidelines and instructions to apply.

Outline

1. Subject of the program
   Sample screening and feasibility study using the following instruments:
   • (1)DAPHNIS for serial femtosecond crystallography (SFX) [Tono et al., J. Synchrotron Rad. 22, 532 (2015)]
     • X-ray diffraction measurement of micrometer-sized protein crystals
     • Powder diffraction measurement of nanometer-sized crystals

     Pump-probe experiments using optical lasers are not included.

   • (2)Experimental platform using the high-power nanosecond laser [Inubushi et al., Appl. Sci. 10, 2224 (2020)]
     • Ultrafast X-ray measurements of matter under pressures of sub-terra Pa ranges generated by laser-induced shock waves.

     Please refer to the description on the high-power nanosecond laser system (HERMES) in Important Notices.

   Please note that we may not be able to fulfill your request on experimental conditions due to the beamtime schedule.

2. Allocatable beamtime
   The maximum beamtime is 1 shift (12 hours).
    
3. Co-applications with the SACLA Research Proposals
   The Feasibility Study Programs and the SACLA Research Proposals can be applied simultaneously. If you apply both with the same contents, you do not need to submit the application form of the SACLA Feasibility Study Program. Instead, please put a check mark to the corresponding item in Term 5 (Co-Application with Feasibility Study Program) of the application form of the SACLA Research Proposals. In this case, the submitted proposal is reviewed as the Feasibility Study Program only when your SACLA Research Proposal is rejected.
    
4. Publication of results
   Publication as peer-reviewed papers is not required for research results obtained through the Feasibility Study Programs. Project leaders must submit Experiment Summary Reports within 60 days after completion of the experiment. The Experiment Summary Reports will be public online.

[Important Notices]

• Influence of the COVID-19 pandemic
  • Constraints associated with COVID-19 are expected in conducting users’ experiments to ensure the health and safety of visitors and SACLA staff. check the up-to-date information on the User Information website.
  • To reduce the risk of COVID-19 infection, users are requested to minimize the number of on-site participants for carrying out their experiments. For this purpose, the use of online tools is strongly recommended for data analysis, data sharing, and meetings to collaborate with off-site users.
• High-power nanosecond laser system
  Osaka University had deployed a high-power nanosecond laser system (HERMES) at SACLA. An experimental system is available at BL3 EH5 for advanced pump-and-probe experiments with the XFEL and the high-power nanosecond laser.
  Applicants/project leaders who apply for the above experimental system are required to consent to the following matters before submitting their programs.
  • (1) Any program using the above experimental system is also regarded as a proposal for Collaborative Research of Institute of Laser Engineering (ILE), Osaka University.
  • (2) JASRI provides information given in a program to ILE if the program is approved.
  • (3) Applicants/project leaders shall state in presentations and publications that the results were obtained by using both the SACLA XFEL and the high-power nanosecond laser system of ILE, Osaka University.
     
  • Applicants/project leaders should contact the XFEL Utilization Division (mail to: sacla-bl.jasri@spring8.or.jp) in advance of the program submission for the information of the experimental system and its capabilities.
    Please note that the typical operating conditions of the laser system in 2021B were as follows.
    – Pulse energy: 10-15 J on sample
    – Pulse shape: 5 ns square pulse
    – Central wavelength: 532 nm
    – Focused beam profile: flat-top profiles with a diameter of ~120, ~170 or ~260 µm (FWHM) using a diffractive optical element (DOE)

１．Types of Programs

Call for 2022B SACLA Feasibility Study Programs at SACLA

• Feasibility Study Programs: Screening of samples, measurement conditions and feasibility studies

Once approved for beamtime, programs are valid for only 2022B.

２．Applicant Eligibility

There are few restrictions on the eligibility of applicants:

• Students are ineligible (however, students can participate as project team members in any Feasibility Study Program).
• If you are affiliated with an institution outside Japan, please have at least one local contact person that is affiliated with a Japanese institution participate in your experiment. If you cannot find one, please contact the Users Office.

3. Beamlines and Instruments Available to Users

The following instruments are available:
 – Experimental platform for Serial Femtosecond Crystallography (SFX) at BL2 or BL3
 – Experimental platform for pump-and-probe measurements with the XFEL and the high-power nanosecond laser at BL3

For details, please see the Beamline Technical Information for SACLA HP at the following link: http://xfel.riken.jp/eng/users/index.html.

4. Program Period

The program period extends from October 2022 through February 2023* (excluding scheduled maintenance periods).
During this period, the facility will operate around the clock with user beamtime allocated for successful program and proposals.
For SACLA beamlines, the beamtime for Feasibility Study Programs is basically allocated by max 1 shift (12hours).
^*Subject to change, due to budgetary constraints.

5. Fees

There is no charge for SACLA Feasibility Study Programs, neither Beamtime Fee nor User Fee.

6. Application and Required Procedures

Applicants/project leaders are required to submit applications via the SACLA User Information website (SACLA UI site).

1. User Registration
   To submit an application, user accounts (i.e., user ID and password) for SPring-8/SACLA are required for all participants of the experiments. For registration, please visit the website: https://sacla.xfel.jp/?p=28&lang=en. Before starting the application process, project leaders must ensure that all project team members have completed user registrations.
    
2. Application Method
   Applicants/project leaders are required to submit applications online via the SACLA UI site using the web-based proposal submission system.
    
   Please see the following link for details on submitting applications online, as with an application for SACLA Research Proposals: https://sacla.xfel.jp/?p=2139&lang=en.
    
   You are strongly encouraged to first create a draft of your application offline using the MS Word templates provided. These templates are intended as guidance to facilitate the completion of the online application form and to prevent omissions of important information that should be provided.

Application Templates

– Feasibility Study Programs

 

3. Confirmation E-mail
   Upon successful submission, you will receive a confirmation email with an attached copy of the Agreement (Rules for Users) in PDF format. If you do not receive the confirmation email, please log in to the system to confirm that your application was submitted successfully.
    
4. Other
   • [Lifetime of Programs]
     Approved Programs are valid only for the forthcoming user operation research term (2022B). Make sure that the proposed research can be completed within that period; beamtime cannot be approved for comprehensive research that cannot be finished within the timeframe of a single research term.
   • [Project Leader]
     The project leader is the person who will assume overall responsibility throughout the duration of the experiments at SACLA.

7. Online Submission Deadline

Wednesday, May 25, 2022, 10:00 am Japan Standard Time (UTC+9)

To avoid last minute technical problems and possible network congestion, you are strongly encouraged to complete and submit your application well in advance of the deadline.
If you have trouble completing/submitting your application online, please contact the SPring-8/SACLA Users Office prior to the deadline.

8. Review Criteria and Notification of Review Results

1. Review Criteria
Feasibility Study Programs should be fully peer-reviewed in terms of ethics, technical feasibility, and the safety of the experiment.
There is a limit to the total beamtime allocation for Feasibility Study Programs
 
2. Notification of Review Results
Applicants will be notified of the review results (i.e., the outcome of your application) via email and User Information My Page in early-August 2022.

9. Experiment Summary Report

To ensure transparency of the Feasibility Study Program, users are required to submit an Experiment Summary Report* within 60 days following their experiment.

*Experiment Summary Report
Length: up to one A4 page
Language: English or Japanese
Required Information: purpose, experimental method, experimental data, samples, and summary of the results.

Two weeks following the report submission deadline for the last experiment of the term (60 days after the end of each half-year research term + two weeks), submitted experiment summary reports will be incorporated into the experiment summary report database with search capabilities and made available on the UI site. Please see the following link for details, as with an application for SACLA Research Proposals: https://sacla.xfel.jp/?p=105&lang=en#ch01.
If you have any questions about the Required Information, please contact the SPring-8/SACLA Users Office.

10. Dissemination of Research Results

Publications of Research Results is not mandatory, but if users publish their results in the following three formats, they shall state in the publications that the results were obtained by using SACLA, and register the published works with the Publications Database.

1. Refereed journal papers, including refereed proceedings and doctoral thesis (Program No. must be specified).
2. SPring-8/SACLA Research Report
3. Technical journal articles

Please see the following link for details, as with an application for SACLA Research Proposals: https://sacla.xfel.jp/?p=107&lang=en.
As stated above, in case of using the combination system of XFEL and high-power nanosecond laser system of Osaka University, users shall state in the publications that the results were obtained by using both SACLA and the high-power nanosecond laser system of Osaka University.

11. Important Notes

1. Radiation Worker Registration
   Based on Japanese law (i.e., the Ordinance on Prevention of Ionizing Radiation Hazards), all SACLA users are required to register as SPring-8/SACLA radiation workers. Please see the following link for details: https://sacla.xfel.jp/?page_id=287&lang=en#ch05-1.
2. Safety Precautions
   For your safety, do not work alone. Please work in a group of two or more.
3. Cancellation of Beamtime
   Please be advised that your scheduled beamtime may be cancelled in emergencies such as equipment failure, natural disaster, pandemic, etc. In such cases, users cannot claim compensation for the lost beamtime.
4. General Insurance and Compensation
   Users shall take out appropriate personal injury and liability insurance before conducting experiments. If users damage SPring-8/SACLA facilities, equipment or persons, either willfully or through gross negligence, JASRI may require them to meet all or part of the cost of repairs. JASRI shall take due account of all relevant circumstances in determining the degree of user liability.

12. Contact/Consultation

• General Inquiries
  SPring-8/SACLA Users Office
  Japan Synchrotron Radiation Research Institute (JASRI)
  1-1-1 Kouto, Sayo-cho, Sayo-gun
  Hyogo 679-5198 Japan
  Tel: +81-(0)791-58-0961
  Fax: +81-(0)791-58-0965
  email: sacla.jasri@spring8.or.jp
• Consultation for Technical Issues
  XFEL Utilization Division
  Japan Synchrotron Radiation Research Institute (JASRI)
  1-1-1 Kouto, Sayo-cho, Sayo-gun
  Hyogo 679-5198 Japan
  email: sacla-bl.jasri@spring8.or.jp

Top of Page